No overselling, no guesswork — just a Furnace Repair crew that diagnoses it right the first time. Priority scheduling available across Glenwood and the surrounding zip codes.
No automated menus for emergencies — a real person handles the call.
Ask as many questions as you want; we'd rather over-explain than leave you unsure.
Most repairs are completed same-visit, and we test the system before we leave to confirm it's actually holding.
Leonard HVAC was built by technicians who got tired of watching homeowners get oversold. Our crews carry manufacturer certifications across the major residential and commercial equipment lines.
You won't find us buried under layers of call-center scripts — we're the team that shows up in the truck, not a subcontractor we've never met. Every job we run is backed by full liability coverage and current state licensing, and we keep that documentation available on request for every job, routine or emergency.
We know which neighborhoods run on older ductwork and which subdivisions were built with newer high-efficiency systems. That local knowledge shapes how we diagnose problems — it's the difference between a tech who's guessing and a tech who's seen your exact situation a hundred times before.
Trust in this industry gets eroded fast, and it takes real consistency to earn it back. That's the gap we built Leonard HVAC to close. Every dispatcher, every technician, and every follow-up call is held to the same standard, because a customer who trusts us once tends to call us again — and Glenwood is a small enough community that reputation travels fast.
Our office team is based locally too, not routed through an out-of-state call center that's never seen a Glenwood rooftop unit. We keep parts inventory stocked based on what actually fails most often on Glenwood's housing stock.
Every service below is backed by the same licensing, warranty, and upfront pricing you get on any job we run.
A dead system in the middle of a heat wave or a cold snap isn't just inconvenient — it can be a real safety issue for kids, pets, and older residents. Our Glenwood dispatch team sends the closest available truck first so a technician is diagnosing your system as fast as physically possible.
If a specialty part genuinely does need to be ordered, we'll set up a safe temporary fix and give you a real timeline instead of leaving you guessing.
If your unit is past its expected service life, running loud, or spiking your utility bill, a replacement conversation is worth having. We walk Glenwood homeowners through efficiency ratings and how they translate into real monthly savings before a single piece of equipment gets ordered.
Every install ends with a performance test, confirming airflow, temperature split, and refrigerant charge are all where they should be before we consider the job finished.
Commercial equipment operates differently than a residential unit, and it needs technicians who actually understand rooftop packages and multi-zone systems. Our commercial division services rooftop units and package systems across Glenwood, with service agreements built around your operating hours.
Property managers working with multiple Glenwood locations can set up a standing account so every site gets consistent service history and pricing.
Most emergency breakdowns start as a small, ignorable warning sign months earlier. Beyond standard tune-ups, we also handle indoor air quality upgrades for homes with allergy or asthma concerns for Glenwood households that want more than just temperature control.
Maintenance plan members in Glenwood get scheduling reminders automatically, so tune-ups don't fall through the cracks during a busy season.
We'd rather set clear expectations upfront than make vague promises we can't back up.
Every repair comes with a workmanship warranty explained in plain terms before we leave.
We quote a flat rate before work begins and that number doesn't change once you approve it.
If anything feels off after we leave, one call gets a tech back to your Glenwood address.
A little attention to how your system is running can save you a lot of money and discomfort.
A healthy system runs with a consistent, low hum — banging, screeching, or grinding usually points to a loose part or failing motor.
This is one of the most common complaints we hear on service calls across Glenwood.
A tune-up often identifies exactly what's driving the extra energy use.
A system that won't hold a steady cycle is often fighting a sizing issue, a thermostat problem, or a refrigerant imbalance.
Chemical odors may signal a refrigerant leak, which requires a licensed technician to handle safely.
We'll always tell you honestly when a repair is the better call versus when it isn't.
We explain diagnostic fees and repair estimates before authorizing work.
Emergency calls get moved to the front of the line automatically.
Parts and labor are backed by warranty terms explained in plain language.
We run background checks because you're letting someone into your home.
You make the final call — we just make sure you have the full picture.
We'll walk you through what's actually available before you decide.
We don't write these — our customers do.
"The furnace stopped working overnight and someone was at our door before 9am. No pressure to buy a whole new system when a repair was all we needed."
"Signed up for the annual plan after our first repair and it's paid for itself already. Techs are always polite, always on time, and clean up after themselves."
"Explained the sizing calculation so I understood why they weren't just installing the same unit again. Followed up a week later just to check everything was still running fine."
"Commercial dispatch was quick and the tech understood our system without needing to be walked through it. Kept our kitchen running through the weekend rush."
"The estimate matched the final invoice exactly, down to the dollar. Would use them again without hesitation."
"Called at 11pm during a heat wave and honestly didn't expect anyone to pick up, let alone show up. This is the company I'm saving in my phone now."
After thousands of service calls across Glenwood, a handful of causes show up again and again.
Glenwood's seasonal swings put real stress on a system that isn't maintained regularly. Filters should be checked monthly during heavy-use seasons and replaced roughly every 60-90 days depending on your household and any pets.
Clearing debris, leaves, and overgrown landscaping away from an outdoor condenser unit gives it room to breathe and keeps it running efficiently. None of this replaces a professional tune-up, but it does reduce the wear that leads to premature breakdowns between visits.
Our technicians train across the major residential and commercial equipment lines, so you're not limited to a single brand's service network. If your system was installed by a different company entirely, that's not a problem — we service equipment regardless of who originally put it in, and we'll pull the model and serial information to confirm parts compatibility before any repair begins.
Here's a look at the kind of experience that shows up at your door.
Handles the majority of Glenwood installs and specializes in properly sizing equipment for older housing stock.
Runs point on overnight and weekend emergency calls throughout Glenwood.
Experienced with the light industrial and retail equipment common across the area.
Standard appointments are usually scheduled within 24-48 hours, while true emergencies jump the queue.
We explain the diagnostic fee upfront and provide a flat-rate repair quote once the issue is identified.
Yes, no-heat and no-cool situations are treated as priority calls regardless of the hour.
Every technician we send is licensed in accordance with Glenwood, IL requirements and carries full liability coverage.
We never push a replacement when a straightforward repair will genuinely solve the problem.
Ask your technician about current plan pricing during any service call.
We cover Glenwood and the surrounding communities, including the zip codes listed in our coverage section below.
Property managers and business owners can request a dedicated point of contact for ongoing service.
Yes, we service systems regardless of who originally installed them.
We understand a full system replacement is a significant expense, which is why flexible payment options exist.
Twice-yearly maintenance is the standard we recommend given the temperature swings the area sees.
If you smell gas or burning, shut off the system at the breaker and step outside, then call us immediately.
Our pricing is explained clearly before dispatch, and any after-hours consideration is communicated upfront — never as a surprise on the final invoice.
More involved repairs, like a coil replacement or a refrigerant leak repair, take longer and the tech will give you a realistic estimate before starting.
Let dispatch know ahead of time if access will be handled differently than a standard homeowner visit.
From the older, established streets near the center of Glenwood to the newer developments on the outskirts, our trucks cover the full footprint of the city.
If you manage several units or a shared system across a Glenwood property, ask about setting up a standing service account so every request gets handled under one consistent agreement.
Qualifying installations can be financed through options we'll walk you through during your in-home estimate, with terms explained clearly before you commit to anything. If a rebate or local incentive program applies to your Glenwood installation, our technicians will flag it during the estimate rather than leaving you to track it down after the fact.
We dispatch throughout Glenwood and the neighboring communities, keeping response times tight because our trucks stay close to home.
Property managers with multiple Glenwood addresses can consolidate everything under one account for simpler scheduling and consistent pricing across every location.
